Advertisement
5. Connect the PSC RF Multi SR Six Pack cable mounted SMA connectors to your slot
receivers using a "criss cross" or X pattern. See photo below:
6. Power up the unit. Note that the power switch lights up blue when the unit is turned
on.
*NOTES*
1. When used with ENG "bag" mixing setups, we recommend that you remotely
mount your receive antennas up away from your equipment on your bag's shoulder
straps. This will help eliminate picking up of RF spray from digital recorders.
2. Different brands of wireless receivers require their own specific brand made
adapters to work with our Six Pack. These are the same adapters required to install
the slot receivers in an Ikigami or Panasonic camera. For example:
Lectrosonics SRB requires their "SRUNI" kit.
Wisycom MCR42 requires their "SCK42-IK-PSC kit.
Audio Limited CX2-P (DB-25 pin model....Ikigami & Panasonic) need no adapters.
Advertisement
