Advertisement
USE:
1. Install your slot style receivers into the openings on the front of the PSC RF Multi SR
Six Pack noting the correct direction of the DB-25 connectors. Gently slide the
receivers into the slots until you feel the DB-25 connectors line up. Once you feel the
connectors line up, firmly press the slot receiver fully into place.
2. Connect your audio output cables from the six TA3M audio outputs to your mixer or
recorder's inputs.
3. Connect a source of external 12Vdc power to the Hirose 4 pin connector on the left
side panel of the unit.
4. Connect your two receiver antennas to the RF input BNC connectors on the front
panel of the unit. When using powered antennas or remote line amplifiers, turn on
the "Antenna" power switch. For all other uses, leave this switch turned off.
Left Side Panel showing:
4 Pin Hirose Power Connection
6 x TA3M Audio Output Connections
2 x SMA RF Outputs (loop throughs)
Advertisement
