Mitsubishi Electric FR-A760-00017-NA Installation Manuallines page 9

WIRING
FR-A760-00550-NA
R1/L11 S1/L21
Screw size(M4)
N/-
R/L1 S/L2 T/L3
Screw size(M8)
Power
supply
CAUTION
· The power supply cables must be connected to R/L1, S/L2, T/L3. Never connect the power cable to the U, V, W of the inverter.
Doing so will damage the inverter. (Phase sequence needs not to be matched.)
· Connect the motor to U, V, W. At this time, turning on the forward rotation switch (signal) rotates the motor in the
counterclockwise direction when viewed from the motor shaft.
7
Charge lamp
Jumper
Screw size(M8)
P/+
Jumper
IM
Motor
FR-A760-00840-NA
R1/L11 S1/L21
Screw size (M4)
R/L1 S/L2 T/L3
Power
supply
* When using the inverter with LD or SLD set, remove a jumper
between P/+ and P1 and connect a DC reactor.
Charge lamp
Jumper
Screw size (M8)
N/- P/+
Jumper *
Screw size (M8)
IM
Motor