Remote vehicle control system keyless entry upgrade security system (8 pages)
Summary of Contents for Code Alarm CA2LED5
Page 1
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information. CA2LED5 / AS9234E 4280852 Owners rev A.
Page 2
Table of Contents Using Your Remote Control ............3 2 Way Transmitter Notifications ..........9 Transmitter Programming ............9 Replacing Remote Control Batteries ........10 2017 Voxx Electronics Corporation. All rights reserved.
The vehicle will now be under control of the remote start system. Turn your ignition switch off, WITHOUT, stepping on the brake, and exit the vehicle. Lock the doors with the key to insure security. CA2LED5 / AS9234E 4280852 Owners rev A.
Page 4
Remote Start Shutdown: To cancel the remote vehicle start function, press and release the button 2 times within 2 seconds. Timed Start Program: The Remote Start unit has the ability to start the vehicle automatically at timed intervals. This feature is useful in extremely cold climates where starting the engine is the only means to keep the battery charged and fluids warm.
Page 5
To return to normal operation, press and release the Push-Button switch any time the ignition is on. NOTE: Always remember to return the vehicle to the valet off position. This will ensure that the vehicle remains protected at all times. CA2LED5 / AS9234E 4280852 Owners rev A.
Page 6
Manually Overriding Your Alarm System (Alarm Systems Only): Using the Dash Mounted PBLED Push-Button Valet/Override Switch your Security System can be disarmed without the use of the keychain transmitter. This is necessary, since you will need the ability to operate your vehicle if the transmitter is lost or its battery fails.
Page 7
NOTE: If 15 seconds of inactivity expire, or if the ignition switch is turned off for more then 5 seconds during any of the above steps, the unit will revert back to the last successfully stored code. CA2LED5 / AS9234E 4280852 Owners rev A.
Page 8
Manually Overriding Your system - Using the Custom Code: Assuming the override code programmed has not been changed, and the default override code of 11 is in the system’s memory. Enter the vehicle and turn the ignition switch to the on position. NOTE: The siren will sound.
NOTE: This system has 1 button programming which programs all channels of the system. NOTE: The system will hold up to 4 transmitters in memory, programming a 5th transmitter will erase the oldest transmitter in memory. CA2LED5 / AS9234E 4280852 Owners rev A.
Replacing Remote Control Batteries 4 Button Remote Control - Model CAT4M The battery inside each remote control should last approximately 1 year under normal use. When the battery becomes weak you will notice the remote control range (the distance from the vehicle the remote control will work) deteriorate and the small LED on the remote control will dim.
Voxx Electronics Corporation. Customer Service 1-800-421-3209 WWW.CODE-ALARM.COM FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.
Need help?
Do you have a question about the CA2LED5 and is the answer not in the manual?
Questions and answers