Samsung NZ63K7777BK Service Manual page 13

3-4 Replacement of the Working Coil
Parts
Working Coil
This document can not be used without Samsung's authorization.
Explanation Photo
pull & rotate
- 11 -
Explanation
2. Remove Screws securing the
Working-Coil
3. Disconnect all lead wires from the
Assy-Working Coil.
4. For the replacement of Sensor-Top,
pull the Sensor-Top toward bottom
side.
5. Rotate the Sensor-Wire by
90degree until the Sensor-Top can
be remove from the Coil-Working.