Aritech 560 Series Installation Instructions
Aritech 560 Series Installation Instructions

Aritech 560 Series Installation Instructions

Battery powered wireless smoke detector

Advertisement

Quick Links

560/570 Series Battery Powered
Wireless Smoke Detector

Installation Instructions

   
Œ Œ Œ Œ
Ž Ž Ž Ž

   
© 2001 Interlogix B.V. All rights reserved
145207999-1 September 2001

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 560 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Aritech 560 Series

  • Page 1: Installation Instructions

    560/570 Series Battery Powered Wireless Smoke Detector Installation Instructions     Œ Œ Œ Œ Ž Ž Ž Ž      © 2001 Interlogix B.V. All rights reserved 145207999-1 September 2001...
  • Page 2 After the flashes, if the sensitivity is within limits and all  other tests pass, the 560 Series will go into alarm, sound its slot on the lip of the mounting base. (See Figure sounder, and reset after 5 seconds; the 570 Series will Insert the smoke detector into the base and turn remain silent.
  • Page 3 FLASHING: Flashes every 9 seconds to indicate normal ECHNICAL PECIFICATIONS operation. Detects smoke. Voltage................3 VDC OFF: Trouble or maintenance is required. Battery life ..............1 year (min) Battery type .... 3V Lithium, Duracell® DL123A or equivalent EPLACING THE ATTERIES Low battery threshold ......low battery signal at 2.7V The batteries should be replaced annually prior to annual smoke Sounder ........85 dB @ 3 m, temporal output test of the detectors OR if the Low Battery warning is sounded.

This manual is also suitable for:

570 series

Table of Contents