Setting The Date And Time - Ricoh G600 User Manual

Setting the Date and Time

When the power is turned on for the first time, the date/time
setting screen appears.
1
Press the !"#$ buttons to
set the year, month, date and
time.
• Change the value with !" and
move the frame with #$.
2
In [FORMAT], choose the
date and time format.
• Select the date and time format
with !".
3
Check the display and then
press the MENU/OK button.
• The date is set.
• Press the DISP. button when this screen is displayed to cancel
the setting.
Note ---------------------------------------------------------------------------------------------------
• If the battery is removed for more than three days, the date and time settings will be
lost. These settings must be made again.
• To retain the date and time settings, load a battery with adequate remaining power
for more than ten hours.
• The set date and time can be changed later. (GP.142)
• The date and time can be inserted into images. (GP.85)
Setting at shipping
31