Downloading Images Using The Ricoh Gate La - Ricoh G600 User Manual

Downloading Images Using the RICOH Gate La

After installing the software on your computer, connect your camera
to the computer.
1
Make sure the camera power is off.
2
Connect the USB cable to the
USB port of your computer.
3
Connect the USB cable to the
USB terminal of your camera.
• Your camera turns on and the
computer automatically reads the
necessary files.
4
RICOH Gate La starts and
image transfer begins automatically.
5
When image transfer is completed, disconnect the
camera and the computer. (GP.162)
Note ----------------------------------------------------------------------------------------------
• For how to use RICOH Gate La, refer to the "Software User Guide" (PDF file)
contained in the provided CD-ROM. (GP.155)
• If image transfer does not begin, re-start your computer and perform Steps 1 to 5
again.
Caution------------------------------------------------------------------------------------------
• Before opening or closing the battery/card cover or terminal cover, be sure to remove
any water, sand or mud adhering to the camera, and avoid opening and closing the
cover in places where such contaminants may get inside the camera.
• Do not force the USB cable into the terminal.
• Do not apply excessive force with the USB cable connected.
• When using the USB cable, do not move the camera with the USB cable.
6
159