Making Sensitivity Settings (Iso Setting) - Ricoh Caplio RR30 Operation Manual

Making Sensitivity Settings (ISO SETTING)

You can shoot pictures set to your own sensitivity (ISO SETTING) preference.
At purchase, ISO sensitivity is set to "AUTO". When you want it to be very sensitive, select from
among the following three settings: ISO200, ISO400, ISO800.
To set sensitivity, follow the steps below.
Buttons used here
Turn the Mode Dial to
Press the
The Shooting menu appears.
Press the buttons to switch between
displays as required.
• At purchase, your camera is set to Auto.
• When shooting in a dark place without using the flash, raising the sensitivity enables you to give a subject
more brightness.
• If you raise the ISO Sensitivity, it becomes possible to shoot under low light conditions, but your pictures may
become grainy. The higher the ISO Sensitivity, the grainier your pictures are likely to become, so it is
necessary to exercise caution.
Chapter 1 / Section 3 Using Special Features for Improved Photography
(Shooting Mode).
button.
Select [ISO SETTING] and then press the
button.
Press the
SETTING].
Press the
ISO settings are completed.
Press the
The Shooting Menu closes and the setting value is
displayed on the right of the screen.
This setting will be used for shooting until you change it.
59
buttons to select [ISO
button.
button.