Table of Contents
Advertisement
How to Focus
The range displayed on the LCD Monitor is shot as a still image or a movie. When adjusting focus,
press the shutter button halfway (half-press).
To adjust focus, follow the steps below.
Point the lens toward the subject you want to
shoot.
Compose the picture on the LCD Monitor.
The focus is set at the center of the screen,
so use the screen to center your subject.
Half-press the shutter button.
F stop (aperture size) and shutter speed are displayed
in the bottom part of the screen, and the camera
focuses.
Once the shot is in focus, the exposure and white
balance are fixed and the crosshair in the center of
the LCD Monitor turns green, as does the auto-focus
lamp in the lower left of the Viewfinder. Check one of
these to make sure the subject is in focus.
Chapter 1 / Section 2 Basic Shooting
If it cannot focus, the crosshair in the center of the
LCD Monitor turns red.
Before focusing
When the shot is in focus
If the camera did not focus
28
Advertisement
Table of Contents
