HyperSound Clear 500P Quick Start Manual

Quick Start Guide

Refer to HyperSound Clear™ 500P User Guide for Complete Instructions.
PACKAGE CONTENTS
A B
Amplifier / Control Unit (1) HyperSound Speakers (2)
®
D E
Optical (Toslink) RCA Audio Cable (1)
Audio Cable (1)
CONNECTIONS
Direct to TV Setup
TV
HDMI Cable
HDMI Cable
Digital Out
DVD/Blu-Ray Player
Not Included: HDMI Cables
Cable/Satellite Box
Sound Bar Setup
TV
HDMI Cable
HDMI Cable
Digital Out
Sound Bar
DVD/Blu-Ray Player
Not Included: HDMI Cables, Secondary Optical Audio Cable
Cable/Satellite Box
SPEAKER CONFIGURATION
G
C
With Floor Stand Poles
Power Supply (1)
Remote & AAA
Batteries (1)
H
F
Floor Stand Poles (2)
Floor Stand Tool
(Allen Wrench) (1)
Power
HyperSound Clear™ 500P
INPUTS OUTPUT
48VDC
ANALOG IN
OPTICAL 1 OPTICAL 2 OPTICAL WOOFER
Power Supply
Optical Audio Cable
Power
HyperSound Clear™ 500P
INPUTS OUTPUT
48VDC
ANALOG IN OPTICAL 1 OPTICAL 2 OPTICAL WOOFER
Power Supply
Optical Audio Cable
Optical Audio Cable
Notes: Some TV's have settings in the menu which control the audio output. Refer to your
TV manufacturer's manual and make sure the following, if available, is configured.
• Audio out or Digital out, is set to: ON
• Audio out Volume Control is set to: Fixed
• Audio out format or type is set to: Dolby Digital or PCM
Information on alternative RCA Connections available in the User Guide.
Without Floor Stand Poles
For Floor Stand Assembly Please Refer to the User Guide.
Direct to Media Setup
HYPERSOUND EMITTERS ONLY
RIGHT LEFT
HDMI Cable
HDMI Cable
Direct to AV Receiver Setup*
HYPERSOUND EMITTERS ONLY
RIGHT LEFT
Cables Needed:
Power Supply RCA Audio Cable
(For alternative setup)
SPEAKER CONNECTIONS
HyperSound Clear 500P™
INPUTS OUTPUT
48VDC
ANALOG IN
OPTICAL 1 OPTICAL 2 OPTICAL WOOFER
HyperSound Speaker
®
Power
TV
48VDC
Power Supply
Digital Out
DVD/Blu-Ray Player
Digital Out
Cable/Satellite Box
Power
TV
48VDC
Digital Out
HDMI Cable
Power Supply
HDMI Cable
HDMI Cable
Digital Out
AV Receiver
DVD/Blu-Ray Player
Not Included: HDMI Cables
Cable/Satellite Box
Remove Protective Caps
on Optical Cables and
HyperSound Clear™
Speaker.
Optical (Toslink)
Protective Caps
Audio Cable
HYPERSOUND EMITTERS ONLY
1. Turn Counter-clockwise
RIGHT LEFT
to Loosen.
2. Insert Wire.
3. Turn Clockwise to Tighten.
HyperSound Speaker
®
HyperSound Clear™ 500P
HYPERSOUND EMITTERS ONLY
INPUTS OUTPUT RIGHT LEFT
ANALOG IN
OPTICAL 1 OPTICAL 2 OPTICAL WOOFER
Optical Audio Cable
Not Included: HDMI Cables, Secondary
Optical Audio Cable
Optical Audio Cable
HyperSound Clear™ 500P
HYPERSOUND EMITTERS ONLY
INPUTS OUTPUT RIGHT LEFT
ANALOG IN OPTICAL 1 OPTICAL 2 OPTICAL WOOFER
Primary Connection (Used if AV Receiver does not have Digital Out)
Optical Audio Cable
Alternative Connection (Used if AV Receiver has Digital Out)
*Most AV Receivers must have "Audio Pass Through" to
the TV turned ON first before audio can be sent to the
Optical Audio Cable
HyperSound Clear™ 500P from the TV.
HYPERSOUND EMITTERS ONLY
INPUTS OUTPUT RIGHT LEFT
48VDC
ANALOG IN OPTICAL 1 OPTICAL 2 OPTICAL WOOFER
Protective Caps