Ricoh G700SE User Manual page 168

Playback/Deleting
Problem
Cannot play back, or the
playback screen does
not appear.
The contents of the SD
memory card cannot
be played back, or the
playback screen does
not appear.
The picture display
turned off.
A file cannot be
deleted.
Cannot format the SD
memory card.
Cause
The camera is not in playback
mode.
The VIDEO/AV cable is not
connected properly.
The [Video Out Mode] setting is
incorrect.
No SD memory card is loaded, or
an SD memory card with no stored
images is loaded.
You played back an SD memory
card that was not formatted with
this device.
You played back an SD memory
card that was not recorded
normally.
The contact surface of the SD
memory card is dirty.
There is something wrong with
the SD memory card.
Battery is exhausted.
The camera was left unattended
and unused, so auto power off
turned it off.
The file is protected.
The SD memory card is locked.
The SD memory card is locked.
Solution
Press the 6 (Playback) button. P.38
Connect properly.
Set it to the correct format.
Load a card with stored images.
Load a card that was formatted
and recorded with this device.
Load a normally recorded card.
Wipe with a soft, dry cloth.
Play back images from another
card and if there is nothing
wrong with the card, the camera
is okay. There may be something
wrong with the card, so do
not use it.
Check that battery is correctly
inserted. Charge battery
(rechargeable battery only),
insert fresh battery.
Turn the camera back on.
Unprotect the file.
Unlock the card.
Unlock the card.
Refer to
P.81
P.86
—
P.27,
P.83
—
—
—
P.26,
P.27
P.29
P.79
P.25
P.25
17
167