Router Functionality - Bose PANARAY System Installation Manual

The 2 x 4 router is updated every time a new
preset is loaded to reflect the stored output
configuration. The router can be manually edited
by the user to accommodate additional output
configurations.
To access the router, press the UTILITY button
and use the Arrow UP/Arrow DOWN buttons to
navigate through the Utility row. Use the Encoder
wheel to change router values.The following
routing parameters can be accessed under the
UTILITY button:
Output Route 1:
Selects audio information from the CH1 or CH2
inputs and sends it to Output CH1.
The routing information is stored
Default Value:
with each preset.
Output Route 2:
Selects the type of audio information from the
CH1 or CH2 inputs and sends it to Output CH2.
The routing information is stored
Default Value:
with each preset.
Output Route 3:
Selects the type of audio information from the
CH1 or CH2 inputs and sends it to Output CH3.
The routing information is stored
Default Value:
with each preset.
Output Route 4:
Selects the type of audio information from the
CH1 or CH2 inputs and sends it to Output CH4.
The routing information is stored
Default Value:
with each Preset.

9.0 Router Functionality

Each of the four outputs can be set to the
following:
1. CH1/High Frequency: Selects the high
frequency information from the CH1
input.
2. CH2/High Frequency: Selects the high
frequency information from the CH2
input.
3. Mono/High Frequency: Selects the
high frequency information from the CH1
and CH2 inputs and sums them to
Mono.
4. CH1/Low Frequency: Selects the low-
frequency information from the CH1 input.
5. CH2/Low Frequency: Selects the low-
frequency information from the CH2 Input.
6. Mono/Low Frequency: Selects the low-
frequency information from the CH1 and
CH2 inputs and sums them to Mono.
7. CH1/Full Range: Selects the low-
frequency information from the CH1
input.
8. CH2/Full Range: Selects the low-
frequency information from the CH2
input.
9. Mono/Full Range: Selects information
from the CH1 and CH2 inputs and sums
them to Mono.
10. CH1/No EQ: Bypasses active Bose
CH1 Program Material.
11. CH2/No EQ: Bypasses Active Bose EQ for
CH2 Program Material.
12. Mono/No EQ: Sums the CH1 and CH2 to
Mono and bypasses the Bose EQ presets.
® EQ for
29