Table of Contents
Advertisement
The PANARAY
®
system digital controller has the ability to run a single stereo preset, a single mono preset, or
to run in dual mono mode. In the following section, the controller's signal flow is broken down to provide a
better understanding of its full functionality.
Input CH1
Input CH2
Stereo Operation: When a preset is loaded from the stereo bank, the EQ/crossover blocks both process
each input the same way, meaning that the parameters are "linked". The signal then passes through the router
section where the CH1 and CH2 inputs are sent to independent output channels for stereo operation.
Mono Operation: When a preset is loaded from the mono bank, the EQ/crossover blocks both process each
input the same way, meaning that the parameters are "linked". The signal then passes through the router sec-
tion where the CH1 and CH2 inputs are summed to mono. The controller has the ability to sum a stereo signal
to mono, or, it can process a single input for mono operation. Audio information is routed to the same outputs
regardless of the number of inputs that are connected.
Dual Mono Operation: When the PANARAY
EQ/crossover blocks process each input independently – allowing the user to run two independent speaker
EQs. The router also processes each input independently, so each output is discrete.
4.0 Signal Flow
Input
Meter
X-
Input
EQ
over
trim
CH1
CH1
X-
Input
EQ
over
trim
CH2
CH2
Input
meter
®
system digital controller is used in dual mono mode, the
1 CH1 High
2 CH2 High
High
3 Mono High
Low
4 CH1 Low
5 CH2 Low
6 Mono Low
7 CH1 FR
8 CH2 FR
9 Mono FR
10 CH1 No EQ
11 CH2 No EQ
12 Mono No EQ
High
Low
Delay
Output 4
Limiter
line
Delay
Limiter
Output 3
line
Delay
Limiter
Output 2
line
Delay
Output 1
Limiter
line
11
Hide quick links:
Advertisement
Table of Contents
