Table of Contents
Advertisement
DESCRIPTION OFTHE SYMBOLS
The use of symbols in this manual is intended to draw your attention to possible
risks. The safety symbols and the explanations that accompany them must be
perfectly understood. The warnings in themselves do not remove the risks and
cannot replace correct actions for preventing accidents.
This symbol, marking a point of safety, indicates a caution, warning
or danger. Ignoring this warning can result in an accident to yourself
or others. To limit the risks of injury, fire or electrocution, always
follow the recommendations indicated.
WARNING – To reduce the risk of injury, user must read instruction
manual.
Use safety equipment. A dust mask, non-skid safety shoes and a
hard hat must be used for the applicable conditions. Wear
heavy-duty work gloves during use.
Always wear eye protection. Wear ANSI-approved safety goggles.
Always wear hearing protection when using the tool. Prolonged
exposure to high intensity noise is able to cause hearing loss.
IMPORTANT SAFETY INFORMATION
WARNING! READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND
WARNINGS BEFORE OPERATING THIS TOOL FAILURE TO DO SO MAY
RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL
VOID WARRANTY.
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or
wet locations. Don't expose to rain. Keep work area well lighted. Do not use
electrically powered tools in the presence of flammable gases or liquids. Do not
bring combustible materials near the tools.
3. As with any tool, use common sense when operating. Do not wear loose
clothing or jewelry that could become caught by moving parts, causing injury.
Operate tool a safe distance from yourself and others in the work area.
4. Keep children away. Children must never be allowed in the work area. Do not
Advertisement
Table of Contents
