Table of Contents
Advertisement
TROUBLESHOOTING
INSUFFICIENT POWER:
Probable Cause
Dirty or clogged air passages....... Flush and lubricate tool, drain air tank and supply line
Insufficient air supply..................... Increase line pressure, Make sure compressor
Air leakage..................................... Use PTFE tape at all fittings and joints. Check tool for worn
Worn/damaged wear & tear parts.. Replace as necessary.
Tool matching................................ Be sure you are using a tool suited for the torque
ASSEMBLY DIAGRAM
Solution
matches tool's air pressure and consumption needs
or damaged O-rings & seals.
requirements of the job at hand.
Advertisement
Table of Contents
