Figure C-2 Pin Outs For Internal Screw Connectors Used Internally In The Lcm-2Xx; Figure C-3 Pin Outs For Micro_Style Connectors - Omron MC4700 Installation And Operating Manual

Device Connector
(Male Contacts)

Figure C-2 Pin Outs for Internal Screw Connectors used internally in the LCM-2XX

M-12 M
C.4.2
ICRO
The Nema box controllers offer an optional M-12 micro-style connector for external connection to a
DeviceNet Network with the following pin out definition.
The micro_style connectors (Fig 2, internal colors correspond to the M12 connector used on the LCM-
2XX series controller).
1.Drain (brown)
2.V+ (white)
3.V_ (blue)
4.CAN_High (black)
5.CAN_Low (gray)
4
5
1

Figure C-3 Pin Outs for Micro_Style Connectors

Note : Device-Net requires that connectors on devices must have male contacts.
OMRON SCIENTIFIC TECHNOLOGIES INC.
Fremont CA USA
Tel: 1/888/510-4357 in USA and Canada
Network Connector
(Female Contacts)
5 4 3 2 1
_S LCM-2
TYLE CONNECTOR FOR
3
1 – Drain (Brown)
2 – V+ (White)
3 – V– (Blue)
4 – CAN-H (Black)
5 – CAN-L (Gray)
2
96
5 – V+ (White)
4 – CAN-H (Black)
3 – Drain (Brown)
2 – CAN-L (Gray)
1 V- (Blue)
XX SERIES
© OSTI 1209 PN99584-0050 Rev. E
Original Instructions