Table of Contents
Advertisement
S4D300-AP28-30
CAUTION
The motor restarts automatically when operating voltage
is applied, e.g. after a power failure.
Danger of injury
→ Keep out of the danger zone of the device.
→ When working on the device, switch off the mains
supply voltage and secure the latter from being switched on
again.
→ Wait until the device stops.
1.5 Safety and protective functions
DANGER
Missing safety device and non-functioning safety device
If there is no safety device, you could be seriously injured, for
example by reaching into the running device with your hands.
→ Operate the device only with a fixed and isolating safety
protection and a fixed guard grille.
The guard must withstand the kinetic energy of a fan blade.
→ The device is a built-in component. You, the owner/
operator, are responsible for providing adequate protection for
the device.
→ Instantly stop the device once you detect a missing or
ineffective protective feature.
1.6 Mechanical movement
DANGER
Rotating device
Body parts coming into contact with the rotor and impeller can
be injured.
→ Secure the device against accidental contact.
→ Before working on the system/machine, wait until all
parts have come to a standstill.
WARNING
Rotating device
Long hair, loose items of clothing and jewellery could become
entangled and pulled into the device. You could be injured.
→ Do not wear any loose clothing or jewellery while working
on rotating parts.
→ Protect long hair by wearing a cap.
1.7 Emission
WARNING
Depending on the installation and operating conditions,
a sound pressure level greater than 70 dB(A) may arise.
Danger of noise-induced hearing loss
→ Take appropriate technical safety measures.
→ Protect operating personnel with appropriate safety
equipment, e.g. hearing protection.
Item no.: 10561-5-9970 · Revision status: KM68158 · Print-out on 27.04.10 · Created by Y. Uhlmann (VM-TDO) · Page 2 of 9
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · 74673 Mulfingen · Phone: +49 7938 81-0 · Fax: +49 7938 81-110 · www.ebmpapst.com · info1@de.ebmpapst.com
Operating instructions
1.8 Hot surface
1.9 Transport
1.10 Storage
Store the device in a dry and weatherproof manner in the original
packing in a clean environment.
Protect the device from environmental impacts and dirt until the final
installation.
We recommend storing the device for a maximum of one year.
Maintain the storage temperature, see
chapter 3.5 Storage conditions.
1.11 Disposal
When disposing of the device, please comply with all relevant
requirements and regulations applicable in your country.
CAUTION
High temperature at the motor housing
Danger of burn injuries
→ Ensure that sufficient protection against accidental contact is
provided.
NOTE
Transport of device
→ Transport the device in its original packaging only.
→ Secure the device so that it does not slip, e.g. by using a
clamping strap.
Advertisement
Table of Contents
