Host Interface - Ricoh Aficio GS 106 Operating Instructions Manual

❖ Host Interface

I/O Buffer
I/O Timeout
❖ PCL Menu
Orientation
Form Lines
Font Source
Font Number
Point Size
Font Pitch
Symbol Set
Courier Font
Ext. A4 Width
Append CR to LF
Resolution
❖ PS Menu (optional)
Data Format
Resolution
Colour Setting
Colour Profile
6
Menu
Menu
Menu
Description
You can set the size of the I/O Buffer. Nor-
mally it is not necessary to change this setting.
You can set how many seconds the machine
should wait before ending a print job. If data
from another port usually arrives in the mid-
dle of a print job, you should increase this
timeout period.
Description
You can set the page orientation.
You can set the number of lines per page.
You can set the storage location of the de-
fault font.
You can set the ID of the default font you
want to use.
You can set the point size you want to use for
the selected font.
You can set the number of characters per
inch for the selected font.
You can specify the set of print characters for
the selected font. The available options are as
follows:
You can select a courier font type.
You can extend the printing area width
when printing on A4 sheet with PCL.
When set to On, a carriage return will follow
each line feed: CR=CR, LF=CR−LF, FF=CR−FF.
You can set the print resolution in dots per
inch.
Description
You can select a data format.
You can set the print resolution in dots per
inch.
You can make an RGB setting.
You can set the colour profile.