Table of Contents
Advertisement
❖ System
Print Error Report
Auto Continue
Memory Overflow
Auto Delete Temporary Jobs
Auto Delete Stored Jobs
Memory Usage
Duplex
Copies
Blank Page Print
Printer Language
Sub Paper Size
Page Size
Letterhead Setting
Bypass Tray Priority
Edge to Edge Print
Default Printer Lang.
Tray Switching
RAM Disk
Menu
Description
You can print an error report when a printer
or memory error occurs.
You can select this to enable Auto Continue.
When it is On, printing continues after a sys-
tem error occurs.
Select this to have a memory overflow error
report printed.
You can select to automatically delete print
jobs temporarily stored in the machine.
You can select to automatically delete print
jobs stored in the machine.
You can select the amount of memory used
in Font Priority or Frame Priority, according
to paper size or resolution.
You can select to have print on both sides of
each page.
You can specify the number of print sets.
This setting is disabled if the number of pag-
es to print has been specified with the printer
driver or another command.
You can select whether or not to print blank
pages.
You can specify the printer language.
You can enable the Auto Substitute Paper
Size (A4↔LT) feature.
You can select the default paper size.
You can rotate original images when printing.
When printing, original images are always
rotated by 180 degrees. Therefore, output
might not be as expected when printing onto
letterhead or preprinted paper requiring ori-
entation. Using this function, you can specify
image rotation.
You can specify which of the two options,
(Printer) Driver / Command or Machine Set-
tings, has priority for determining the paper
size for the bypass tray.
You can select whether or not to print on the
entire sheet.
You can set the default printer language if
the machine cannot find the printer language
automatically.
You can set to switch the paper tray.
You can change the settings of the RAM disk.
5
Advertisement
Table of Contents
