titathink TT520PW Quick Manual

1-1. Interfaces for Spy Series
Quick Guide
TT520W / TT520PW
The length of the camera cable is 20 feet. Please don't extend this cable more than 38 feet!
！
Titathink IP Cameras
TT520PW / TT521PW / TT522PW
TT6x0W / TT6x0CW
General I/O
7
TT7x0PW / TT7x0LPW
TT52xG / TT52x-LTE / TT8x0G / TT8x0-LTE
Standard & Pro Version
11
SIM Card Slot
This slot is only built in 3G/4G hidden cameras:
TT52xG / TT52x-LTE (x means 0/1/2/5).
Microphone Jack
！ Warning:
TT525PW doesn't have the jack
because it has a built-in microphone
Includes: Camera unit / Power Adapter / Mounting bracket / Antenna / Manual
in its lens unit.
Ethernet Cable / Screws
V1
2-1. Initialized Connection for Spy Series
Lens unit
5
Power NOTE:
Main unit
Indicated The external microphone
LED
must require an external
power adapter. This should
come with the microphone.
Internet
Router
Power adapter
Connect to router just for initialized
setup. (Recommended)
After setup, disconnect this cable
to let camera work via Wi-Fi.
LAN cable
2-4. Initialized Connection for TT7x0LPW / TT8x0G / TT8x0-LTE
！ NOTE:
This SIM card slot is only
built in TT8x0G or TT8x0-LTE
Lock
Open
Router
OR
LAN cable
Connect to router just for initialized setup. (Recommended)
After setup, disconnect this cable to let camera work via Wi-Fi.
PC
Power adapter
For more details, please see the "Setup via Computer".
1-2. Interfaces for Indoor Series
Lens unit TT6x0W
Microphone
TT521W / TT521PW TT522W / TT522PW TT525PW
Micro SD
Card Slot
Base unit
6
Light Sensor
I/O LAN Reset DC 12V
Infrared
LEDs
LAN Port Reset Button DC Power Socket
2 3 1
！ Warning: Don't plug camera cable into LAN port!
8
Microphone
9
WiFi Antenna Socket
Audio Line-out
2
LAN Port
DC Power Socket
Line-in / MIC Micro SD
CAM WPS LED
8 10 4 Micro SD Card Slot
RJ11 CAM Port
WPS Button
！ Warning:
RESET
Ensure the camera cable good contact to this port,
otherwise, the camera will show you a black
Reset Button
screen.
3
2-2. Initialized Connection for Indoor Series
Line-in / MIC Micro SD
CAM
Router
LAN cable
I/O LAN Reset DC 12V
Power adapter
Router PC
OR
Directly connect to PC if there is no router.
For more details, please see
" Setup via Computer".
Setup via Computer
7 General I/O
1 POWER You may have no a router to set up the camera, there is another way to set up
camera. You need to prepare a computer which has a LAN port as well.
2 DO
3 DI
5
Power Indicated LED 4 GND
Titathink
Cameras
LAN cable
2 LAN Port
1 DC Power Socket 9 Audio Line-out
Please refer to following steps to set up the camera via a computer.
1
You need to change the IP address of computer to 192.168.168.200
2
Connect the camera to the LAN port of computer via LAN cable. Power on
camera and wait about 1 minute then go ahead.
Internet
3
Open a browser and enter http://192.168.168.100. You will get the welcome
page of the camera. *If the welcome page can not be showed, please use Chrome
or Safari to try again, meanwhile, please lower the security level of browser and
ensure the firewall doesn't block the camera.
4
Enter the username and password to login. (The default username and password
are both 'admin').
5
You can browse the right sidebar to see "Network"->"Wireless Setup"-> You can
set up the WiFi for camera in that page.
6
For more details, please visit:
http://support.titathink.com/docs/titathink-hidden-cameras/
setup-via-web-application/1-access-web-application/#access-web-without-router
After you have done, please disconnect the LAN cable between camera and
computer, then camera will be able to work wirelessly. You can follow next
sections to add camera to your mobile devices.
IF YOU HAVE A ROUTER, PLEASE SKIP THIS SECTION AND JUST CONNECT
THE CAMERA TO THE ROUTER VIA A LAN CABLE.
Directly connect to PC if there is no router.
1-3. Interfaces for Outdoor Series
TT7x0PW
TT6x0CW
4
Micro SD
WiFi Antenna
Card Slot
5
RESET
Power Infrared
4
Indicated
LEDs
Reset Button LED
3
Lens
6
Light Sensor
Lens
Infrared
Lens
LEDs
Light Sensor
6
5
Power
Power
Indicated
Indicated
LED
Micro SD
LED
4
5 Card Slot
POWER
3
Microphone
Reset Button
Microphone
Speaker
2
LAN Port
1 DC Power Socket
LAN Port 2
1
DC Power Socket
1
DC Power
！ NOTE: The SD card slot is built in the inner of camera body. Please see the connection figures to check.
Socket
The Reset button of TT7x0LPW / TT8x0G can also be found in the inner of camera body.
Power adapter
Internet
RESET
Router
Connect to router just for initialized setup. (Recommended)
After setup, disconnect this cable to let camera work via Wi-Fi.
OR
PC
Router
Directly connect to PC if there is no router.
For more details, please see "Setup via Computer".
LAN cable
3. You will also need
！
A Smart Device
Smartphone such as iPhone or Samsung
or other Android phone.
Tablet such as iPad or Android tablet.
The smart device have to install an APP called
Anyscene
Anyscene. This app is available to download on
Google Play and Apple APP Store.
By searching the "Anyscene" on Google Play or
APP Store, you will be able to install the app onto
your smart device.
Password: Your Wi-Fi Password
The password of Wi-Fi broadcasted by the
********
same router which the camera is plugged
into.
！
Before you get started setting up the camera to connect a Wi-Fi network, you
need to make sure the Wi-Fi SSID is not 5GHz Wi-Fi network. Or the Wi-Fi setup
will be failure.
Next sections will guide you how to add camera to Anyscene app and set up the
WiFi connection. The guidance of next sections will base on the case which that
the camera connects to the router (Not computer).
1-4. Interfaces Description
TT7x0LPW / TT8x0G
1 DC Power Socket 2 LAN Port
The provided power adapter This port is RJ45 jack and requires an LAN cable for the
should be plugged into this initialized setup. Or stay connected via Ethernet cable as:
1. Wired connection.
power socket.
WiFi Antenna
It requires DC 12V, 1A power 2. PoE connection.
source.
！
NOTE: Don't plug the camera cable into the LAN port if the
camera is TT520, TT521, TT522 (Standard & Pro version).
NOTE: TT6x0W, TT6x0CW don't support PoE connection.
Infrared 6
LEDs
Light Sensor 3 Reset Button 4 Micro SD Card Slot
After the camera is turned on, by
This slot is used to carry a micro SD card to store
pressing the button 10 seconds at
video files. The SD card must meet requirements
least then release, the camera will below:
erase all of the previous settings
1. The capacity up to 128Gb.
and restore it default settings. 2. Class 4 or better.
3. Must be FAT32 format.
Lens
5 Power Indicated LED 6 Light Sensor
This indicated light is used to state the The light sensor determines whether turning on/off
working status. Please see the section night vision feature.
"1-5. Check Power Indicated LED".
General I/O Microphone Jack
7 8
This interface is used to connect external A famale style of RCA audio line-in port.
alarm devices such as: It requires an external CCTV microphone which has
a male RCA plug.
SIM Card Slot
1. PIR sensor
11
(Only for TT8x0G/LTE) 2. Gas detector No need further setup, just plug-and-play.
3. etc.
Micro SD Card Slot 4 +12V DO DI GND
Reset Button 3
Audio Line-out RJ11 CAM Port
9 10
A 3.55mm headphone jack. It requires The provided lens unit part must be connected to
standard headset plug so it can be this CAM port.
connected to a speaker / headset to
broadcast the sound. ！ Warning: Ensure the camera cable of lens unit
good contacts to the CAM port, otherwise, the
Microphone camera will show you a black screen.
11 SIM Card Slot
2 The SIM card must be provided by the mobile carrier of your country.
LAN Port
5
！
Power Indicated LED
Camera requires setup before using, you need to follow next sections to use the
provided LAN cable to connect to a router or a computer first.
1 General I/O 7
After setup is completed, you can disconnect the LAN cable to let camera work
9
Audio Line-out
on wireless mode.
2-3. Initialized Connection for TT7x0PW
Open
Lock
4-1. Quick Setup to Smartphone
#1
Ensure you have finished the above
steps before get started setting up the
camera.
We assume the name of WiFi network
being broadcast is TOTOLINK.
Next, make sure your phone has been
connected to the Wi-Fi "TOTOLINK".
！ WARNING:
*This should be the same Wi-Fi
network being broadcast from the
same router.
*This Wi-Fi network cannot be an
invisible Wi-Fi network due to the
camera can not join it.
#3
Tap "Search" button to discover your camera.
For the Android phone, Tap "Scan local network"
1-5. Check Power Indicated LED
Black status:
No power or the indicated LED
TT52xPW
was disabled on app.
Keep green status:
Camera is starting up,
please waiting.
Green flashing:
Camera is working properly
and is standby.
Green fast flashing:
Someone visits the camera.
TT6x0W TT6x0CW
POWER
POWER
TT7x0PW TT7x0LPW / TT8x0
Power adapter
Internet
Router
LAN cable
Connect to router just for initialized setup. (Recommended)
After setup, disconnect this cable to let camera work via Wi-Fi.
OR
PC
Directly connect to PC if there is no router.
For more details, please see Setup via Computer".
"
#2
Run the Anyscene APP on the phone.
Tap "Add" or button to add your camera.
#4
Tap the listed UID number to add camera.
If there is nothing found, you need to recheck the
wired connection between camera to router.
See the
reverse side