TP-Link Archer C1200 Quick Installation Manual

Ac1200 wireless dual band gigabit router

Hide thumbs Also See for Archer C1200:

Download this manual See also: Configuration Manual, User Manual

Quick Installation Guide

AC1200 Wireless Dual Band Gigabit Router

Connect the Hardware

If your Internet connection is through an Ethernet cable from the wall

instead of through a DSL / Cable / Satellite modem, connect the Ethernet

cable directly to the router's Internet port, and then follow Step 4 and 5 to

complete the hardware connection.

Internet

Power adapter

Modem

Power adapter

Router

Turn oﬀ the modem, and remove

the backup battery if it has one.

Connect the modem to the Internet

port on your router with an Ethernet cable.

Verify that the following LEDs are on

and solid before continuing with the

Turn on the modem, and then

configuration.

wait about 2 minutes for it to restart.

Power

Note: If the 2.4G LED

press the WPS/Wi-Fi On/Oﬀ button for 2 seconds and

check the LEDs again in a few seconds later.

Internet

2.4G

and 5G LED

are oﬀ, please

Turn on the router.

For optimum performance,

orient the antennas as

shown in the drawing.

Page 1 Quick Installation Guide AC1200 Wireless Dual Band Gigabit Router Connect the Hardware If your Internet connection is through an Ethernet cable from the wall Power adapter instead of through a DSL / Cable / Satellite modem, connect the Ethernet Turn on the router. cable directly to the router’s Internet port, and then follow Step 4 and 5 to Router complete the hardware connection.
Page 2 Find the SSID (Network Name) and Wireless Password printed on the label at the Provider. Moreover, the TP-LINK router is equipped with various features, such as Guest Network, Parental bottom of the router. Controls, Access Control, etc. For details, please refer to the User Manual at www.tp-link.com.