Cardin S449 QZ2 Programming Manual

CARDIN S449 QZ2 –

Programming of your new remote control

ming of your new remote control:
There are several methods for programming your new methods for programming your new remote control.
From a remote control that has already been programmed
1. Approach your motor so you are Approach your motor so you are standing a few feet away from it.
2. With a sharply pointed object, press the hidden button from your already With a sharply pointed object, press the hidden button from your already-programmed With a sharply pointed object, press the hidden button from your already
remote control (diagram above, P1). The receiver emits a beep. Let the button go. remote control (diagram above, P1). The receiver emits a beep. Let the button remote control (diagram above, P1). The receiver emits a beep. Let the button
3. Press a button on your already
the button go.
4. Press the button you wish to program Press the button you wish to program on your new remote control. The receiver emits 2
beeps. Let the button go
5. Repeat this procedure for each button you wish to program. Repeat this procedure for each button you wish to program.
6. Wait 10 seconds.
7. Your new remote control is programmed.
http://www.remotecontrol-express.com
Programming Manual
– S449 QZ4 – S449 QZ4M - S486 QZ2
hat has already been programmed:
your already-programmed remote control. The receiver emits a beep. Let
go.
control is programmed.
express.com - TEL : +44 (0) 207 399 7782 - FAX : +44 (0) 207 927 3151
S486 QZ2 - QZ4
The receiver emits a beep. Let
The receiver emits 2
+44 (0) 207 927 3151