Related Manuals for Hi-view Effio-E
Summary of Contents for Hi-view Effio-E
-
Page 1: Instruction Manual
IR Dome Camera Instruction Manual Before operating the unit, please read this manual thoroughly and retain it for future reference. - Page 2 Safety Precautions DO NOT ATTEMPT TO DISASSEMBLE THE CAMERA. Risk of Electric Shock, Do not Open CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER NO USER- SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSON This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
- Page 3 Incorrectly connecting the power supply may result in fire, electric shock or damage to produce as well. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal heat generation or fire. Securely plug the power cord into power receptacle. A loose connection may result in fire.
-
Page 4: Important Safety Instructions
Avoid aiming the camera directly towards extremely bright objects such as the sun, as this may damage the CCD image sensor. Important Safety Instructions Read these instructions Keep these instructions for later use. Pay attention that all warnings should be adhered to. Follow all instruction. - Page 5 b) In damp or dusty locations c) In a place exposed to rain d) In a place subject to vibration e) Near a source of electromagnetic radiation (wireless/radio or television emission) f) In a place exposed to fluorescent light g) In a place under poor lighting condition The laser beam may damage CCD.
-
Page 6: Table Of Contents
Table of Contents Chapter 1 Overview Instruction Specification Package Product Parts Chapter 2 Operation Instruction 10 12 Connection Installation 10 12 Before Installation Installing the Camera Cautions for Installation Adjustment of Function Adjustment of Monitoring Direction Chapter 3 Typical CCD Phenomena Chapter 4 Common Troubleshooting Chapter 5 Current Maintenance Chapter 1 Overview... -
Page 7: Specification
Specification Model No. Effio-E Effio-P TV System NTSC NTSC SONY 1/3” Super HAD Ⅱ CCD SONY 1/3” EX-view HAD Ⅱ CCD CCD Sensor Effio-E Effio-P Effective Pixel 976(H)×494(V) 976 (H)×582 (V) 976(H)×494(V) 976 (H)×582 (V) Camera Scan 2:1 Interlace SNYC System Internal / External 650TVL(Color）... - Page 8 D/N Switch Auto / Color / Black & White / EXT1/ EXT2 Smart IR OFF / BLC / HLC Usable While WDR OFF — OFF / ON Mirror/Lightness/Contrast/Sh Image — arpness/Color/Gain Menu E-zoom — OFF / ON (X1 - X256) Digital Image —...
-
Page 9: Package
Lens Mount φ14 Lens Day & Night IR Cut Filter with A uto Switch Iris Fixed ± Power Supplyener DC 12V 10% , Support DC12V/AC24V Dual Voltage Power Supply Power Max. 1W (Max. 7 W with IR Cut Filter ON) Consumption Operating -20°C ~ 50°C... -
Page 10: Product Parts
Product Parts Fixed Holder Connerting Part Bottom Cover Button OSD Setup Video Out Port Lens Focus Lever Lens Zoom Lever IR LED Shield Function of product parts Fixed Holder — Fixing the camera to the ceiling or wall Connecting part — Fixing the camera body to the connector and fixing the monitoring direction Bottom Cover Button —... -
Page 11: Connection
Chapter 2 Operating Instruction Connection Connect one end of the BNC Cable to the terminals of the monitor. Connect the other end of the BNC Cable to the VIDEO OUT Then, plug in the power adapter into the power receptacle. The screen will be displayed when the monitor is on. -
Page 12: Installing The Camera
Installing the Camera Installation process is illustrated as below Cable Trough Step1: The side of the fixed holder facing up, to be mounted to the ceiling or wall with 3 connector screws. *Pay attention to the cable trough. Put it in the direction of power supply if cables exit there. -
Page 13: Adjustment Of Function
Adjustment of Function Press the bottom cover button. Pull it downwards to open bottom cover. Use the video out port to connect the multi-tester with the camera, and check the image on screen. Adjust the focal length with the lens zoom level and lens focus level according to need. -
Page 14: Chapter 3 Typical Ccd Phenomena
Chapter 3 Typical CCD Phenomena The following effects on the monitor screen are characteristic of CCD cameras. They do not indicate any fault with the camera. Smear This occurs when shooting a very bright object such as electric lighting, the sun, or a strong reflection. This phenomenon is caused by an electric charge induced by infrared radiation deep in the photosensor. -
Page 15: Chapter 4 Common Troubleshooting
Chapter 4 Common Troubleshooting If encounter troubles in use of the bullet camera, please refer to the following instructions. For more information, please consult nearby local authorized distributor. Troubles Solution Check the power supply, or the connection among the No Video Output cable, camera and monitor.