Eureka 4870 Series Quick Start Manual

STEP
What's in the carton
1 1
Vacuum cleaner
STEP
2 2
Easy assembly
Slide handle onto vacuum body.
Use a Phillips
screwdriver.
Push cord into
cord retainer.
Store nested extension
wands on side.
STEP
3 3 Get ready to vacuum
Lift latch to remove front cover.
See dust bag for
replacement instuctions.
Push brush roll control to
bare floor to stop brush roll.
Push firmly to lock.
PROBLEM SOLVING
Refer to Owner's Guide.
QUICK START GUIDE
Thank you for purchasing your new Eureka vacuum!
Important instructions
For easy assembly, please take a few
moments to read this Quick Start Guide.
If you have questions about your new vacuum,
please contact our customer service helpline at
1-800-282-2886
.
We're here to help!
www.eureka.com
Helpline hours:
8 a.m. to 7:30 p.m. (CST), Monday - Friday
10 a.m. to 6:30 p.m. (CST), Saturday - Sunday
Important safeguards
Handle &
Dusting brush
3 screws
Wrap cord on upper and
lower hooks.
Store crevice tool in slot
on back of vacuum.
Turn selector knob to "floor"
for vacuuming floors, or
"hose" for using attachments.
Adjust height for carpet
or bare floor. If hard to
push, raise carpet setting.
Crevice
tool
Dust bag
style RR
Upholstery Belt
nozzle style R
Extension wand
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
Moving parts. Make sure power switch is in OFF (O) position before
plugging in power cord. Assemble the vacuum cleaner before using.
Tighten 3 screws.
Some models: Slide clip onto
front of handle and store
turbo nozzle.
Store dusting brush in cup on
back of vacuum.
Plug into oulet. Step on
handle release to lower
handle into position.
Loosen hose from hose
retainer and place attachment
onto end of wand or hose.
MAINTENANCE SCHEDULE
Refer to Owner's Guide.
4870 Series
SPECIAL FEATURES
Available on some models
Turbo nozzle
clip
Turbo nozzle
Stair hose
Loop hose around hose retainer.
Clip hose nozzle into place.
Some models: Attach tool to
end of wand or hose for
furniture and stairs.
Store upholstery nozzle
below top cord wrap.
Push firmly to secure.
Push power switch (I) on.
Push power switch (O) off.
Check belt view window for
a broken belt. Replace belt
for brush roll to turn.