Seiko 4F series Battery Replacement Manual page 3

2. Check the movement of the second hand.
One-second
The data is
interval
retained securely.
movement
5-second
The data has
interval
been erased.
movement
5 INPUT DATA.
Tool to use:
Tool for inputting data
1. Pull out the crown to the second click.
2. To input data, contact each terminal and the side face of the battery repeatedly
with the tool until the desired data is shown in the calendar frame.
6
CHECK
Go to
CALENDAR
DATA –
CORRECT?
5
INPUT
Go to
DATA
[ 5-second interval movement ]
Position of terminal for inputting
calendar data: Cal. 8F Series
"Y"
Year
"M"
"AC"
Month
Ø "D"
" "
Date
Input data in the following order.
A
Resetting the date dial position
1 Contact "Ø" and the
battery to show "1".
Ex.) To input "July 12, 2001":
B
Year setting
Contact "Y" and the
battery to show the year
numeral representing the
2
current year.
* After "4", the year
numeral returns to "1".
C
Month setting
Contact "M" and the
battery to show the numeral
for the current month.
7
* January is represented by
"1", February "2", and so on.
* After "12", the month
numeral returns to "1".
D
Date setting
Contact "D" and the
1 2 battery to show the
current date.
Position of terminal for inputting
calendar data: Cal. 4F Series
"Y"
"AC"
Year
"M"
"D"
Month
Date
Ø
" "
* See the table below for the year numerals.
Year
1 2 3 4
numeral
1997 1998 1999 2000
2001 2002 2003 2004
Year
group 2005 2006 2007 2008
3. Push the crown back in to the
normal position.