IBM 1G User Manual page 42

Parameter
dhcp
host
username
password
https
E-mail notification parameters
The parameters in the following table control the e-mail notification feature.
Parameter
email
email_from
email_security
email_username
email_password
email_server
email_subject
24
1G Network Active Bypass: User Guide
Description
DHCP client
dhcp: Set this parameter to dhcp to enable the DHCP
client on the Network Active Bypass unit management
port.
Static: Set this parameter to static to disable the DHCP
client on the Network Active Bypass unit management
port
Host name for the unit
This parameter is read-only.
Default: Proventia_NAB
Administrator account name
Default: admin
Administrator password
Default: admin
Enables or disables the HTTPS server
v 0: disables the secure Web management interface
v 1: enables access to the secure Web management
interface
Default: 1 (enabled)
Description
Enables or disables the e-mail notification feature
v 0: disables e-mail notification
v 1: enables e-mail notification
Default: 1
Name or e-mail address that is displayed in the "From"
field on the e-mail notification
Enables or disables the e-mail security feature
v 0: disables e-mail security feature
v 1: enables e-mail security feature
Default: 1
User name for the e-mail account used to send e-mail
notifications from the Network Active Bypass unit
Password for the e-mail account used to send e-mail
notifications from the Network Active Bypass unit
SMTP server address for the mail server
Text to be displayed in the subject line of notification
e-mail messages
Sample: "Notice: PNAB segment(s) have switched
modes"