Table of Contents
Advertisement
Quick Links
RaySafe ThinX measures X-ray radiation. The instrument is always
on, triggered by radiation. You don't need any correction tables,
since the active compensation feature automatically applies correc-
tions for variation in beam filtration.
1
position RaySafe ThinX on a flat surface. posi-
tion the collimator of the X-ray machine close
to the sensor area.
2
expose.
3
Read the values on the display.
if the detected waveform is pulsed, the num-
ber of pulses will automatically be displayed.
BaTTeRY ReplacemenT
When the yellow leD is blinking,
please replace the battery:
1.
Remove the battery cover.
2. Replace the battery (cR2450).
3. put the cover back. The instru-
ment is ready to use.
cleaning
Use a damp cloth for cleaning.
inSTRUmenT veRSionS
This manual is valid for 1302023-a.
SUppoRT
Do not hesitate to contact Unfors RaySafe for support:
Technical support
+49 731 175 492-20
technicalsupport@raysafe.com
Service
+46 31 719 97 10
customerservice.se@raysafe.com
User ManUal
User ManUal
RaySafe ThinX Intra
Advertisement
Table of Contents
Related Manuals for RaySafe ThinX Intra
Summary of Contents for RaySafe ThinX Intra
- Page 1 RaySafe ThinX measures X-ray radiation. The instrument is always BaTTeRY ReplacemenT User ManUal User ManUal on, triggered by radiation. You don’t need any correction tables, When the yellow leD is blinking, since the active compensation feature automatically applies correc- please replace the battery: tions for variation in beam filtration.
- Page 2 0.5 kHz kVp > 100 kVp Decrease kVp. resolution: 1 µGy (0.1 mr) Unfors ThinX intra has three leD:s. normal state is an idle blink every fourth second. Uncertainty: pulses number of pulses > 999 Decrease the number of pulses.
Need help?
Do you have a question about the ThinX Intra and is the answer not in the manual?
Questions and answers