Print Quality - Xerox Phaser 7500 Installation Manual

Changing Paper Type
EN
Tray 2 Paper Tray 2 Paper
Letter LEF Letter LEF
Plain Paper Plain Paper
Use current setup Use current setup
Change Setup... Change Setup...
If you change the type of paper in a tray, you MUST change the paper type on the
EN
control panel to match the paper you just loaded. If you fail to do this, print-quality
problems can occur and the fuser can be damaged.
Use the Up Arrow or Down Arrow buttons to change the paper type, then press OK
to accept the change.
(8.5 x 11 in.) (8.5 x 11 in.)

Print Quality

EN
Ready To Print
Press ? for help
Troubleshooting
Troubleshooting
Print Quality Problems
For Print-Quality Solutions: For Print-Quality Solutions:
EN
Troubleshooting Print-Quality page. Troubleshooting Print-Quality page.
Troubleshooting chapter in the User Guide. Troubleshooting chapter in the User Guide.