Pioneer AVX-P7300DVD Service Manual page 107

-
Removing the DVD Mechanism Module (Fig.6)
Remove the screw and then remove the
Extension PCB.
Disconnect the connector and then remove the DVD
Mechanism Module.
-
Removing the Grille Assy (Fig.7)
Remove the two screws, remove the connector
and then remove the Grille Assy.
- Removing the Control PCB (Fig.7)
Straight the tabs at six locations indicated.
Remove the screw.
The Control PCB is raised a little.
Connected connector on the other side is removed
then remove the Control PCB.
DVD Mechanism Module
Grille Assy
AVX-P7300DVD
Extension PCB
Fig.6
Control PCB
Fig.7
107