Thv - Martin Audio THV User Manual

TH Series
TH Series 3‐way horn‐loaded, full range systems
THV
The THV is very high performance, vertically formatted, all‐horn, three‐way systems in a single, wide‐bandwidth package.
The THV is bi‐amplified. New drivers have been developed for improved performance in all bands.
The Hybrid™ low frequency section comprises a horn‐loaded 15" (380mm)/4" (100mm) voice coil driver that is reflex loaded to
extend the LF output to below the natural cut‐off point of the horn. The new LF driver features a water resistant cone and triple
roll surround for increased excursion.
The THV mid horn has a unique 'phase‐ball' loading device which maintains the constant directivity characteristics of the horn at
the upper end of its range. It is driven by a new 10" (250mm) midrange driver with an aluminium demodulating ring for improved
high‐mid clarity and reduced distortion when driven hard. The 70° x 40° THV HF section features a neodymium 1" (25mm) exit
compression driver with a Kapton diaphragm for high sensitivity and extended HF performance.
The internal mid/high passive crossover allows this three‐way system to be driven in a bi‐amp configuration. The THV is bi‐
amplified and must be used with a system controller. Martin Audio DX0.5, DX1.5, DX2 or iK42 may be configured to provide the
recommended 2‐way crossover and limiter functions. Martin Audio DX0.5, DX1.5 or DX2 may also be used to configure THV
systems with additional sub‐bass cabinets – e.g. THV + SX218 combinations.
TH Series User Guide V1.0
USER GUIDE
6