Advertisement
Quick Reference Manual 3452
In the Timekeeping Mode, press A, C, or D, or press the rotary switch and then
rotate the rotary switch to select the desired function.
Press the rotary switch again to start an operation.
To return to the Timekeeping Mode, hold down C for one second.
For details, refer to the Operation Guide at the CASIO website.
E-10
Configuring Time Settings
After acquiring location info, use the procedure below to configure time settings.
1. In the Timekeeping Mode, press D.
2. Rotate the rotary switch to select "TIME (GPS)".
3. While outdoors in a location where the sky above is
clearly visible, point the watch's face straight up.
4. Press the rotary switch.
This starts GPS signal reception. After time info is
acquired, "ADJUSTED" appears on the display
along with the current time.
Time adjustment takes anywhere from about 10
Rotary switch
to 65 seconds. In some cases it can take as long
as 13 minutes.
E-12
Specifications
Accuracy: ±15 seconds a month (no adjustment by signal information)
Basic Functions: Hour, minute, second, month, day, day of the week
a.m./p.m.(P)/24-hour timekeeping
Full Auto Calendar (2000 to 2099)
Mobile Link:
Auto time adjustment
Auto Daylight Saving Time (summer time) switching
Phone finder
Communication Specifications:
®
Bluetooth
Frequency band: 2400 to 2480MHz
Maximum transmission: 0dBm (1mW)
Range: Up to 2 meters (Depends on environment.)
E-14
Digital Compass:
Measuring range: 0° to 359°
Compass calibration (3-point calibration, magnetic declination angle)
60-second continuous measurement, Bearing Memory
Barometer:
Measuring and display range: 260 to 1,100 hPa (or 7.65 to 32.45 inHg)
Measuring unit: 1 hPa (or 0.05 inHg)
Auto measurement interval: 2 hours
Calibration, Barometric pressure graph, Barometric pressure change indicator
Thermometer:
Measuring and display range: –10.0°C to 60.0°C (or 14.0°F to 140.0°F)
Measuring unit: 0.1°C (or 0.2°F)
Calibration
E-16
Sunrise/Sunset: Sunrise/sunset time display, Day select
Tide/Moon:*
Tide level (Tide Graph), Moon phase, Moon age,
Day select, Time select (Tide Graph only)
* Requires configuration of app settings.
Stopwatch:
Measuring unit: 1 second
Measuring range: 999 hours 59 minutes 59 seconds (1000 hours)
Measurement accuracy: ±0.0006%
Split times
Countdown Timer:
Setting unit: 1 minute
Measuring unit: 1 second
Measuring range: 24 hours
E-18
Adjusting the Time Setting
Immediately after purchasing the watch or moving to another time zone, perform a
GPS signal receive operation to acquire position info.
1. In the Timekeeping Mode, press D.
2. Rotate the rotary switch to select
"TIME&POSITION (GPS)".
3. While outdoors in a location where the sky above is
clearly visible, point the watch's face straight up.
4. Press the rotary switch.
This starts GPS signal reception. After location info
is acquired, "ADJUSTED" appears on the display
along with the current time in your current location.
Rotary switch
Location info acquisition takes anywhere from
about 40 to 80 seconds. In some cases it can take
as long as 13 minutes.
Using a Phone to Configure Time Settings
For details visit the website below.
http://world.casio.com/manual/wat/
GPS Navigation
You can get even more from the navigation functions of your watch by linking with
the phone app. For example, you could do the actions below.
Mountain climb using a route plan that you created with the app.
Track your jogging route with the watch and then transfer it to the phone for
viewing with the app.
For information about installing the application, refer to the Operation Guide at the
CASIO website.
GPS Navigation:
Track log acquisition
Measurement intervals: Intermittent (each minute, non-stop for approximately
24 hours)/Continual (every few seconds, non-stop for
approximately four or five hours)
Elapsed time measurement
Log usage conditions
Display of straight-line distance to goal, start, waypoints*
Display of direction to goal, start, waypoints*
Goal specification (by recall from point memory)
Route navigation*
Backtrack
Point memory (time, year/month/day, latitude/longitude, altitude, barometric
pressure, temperature)
Point memory icon specification
Track display switching (zoom out, zoom in)
* Waypoints are enabled only when settings are configured with the app.
Altimeter:
Measuring range: –700 to 10,000 m (or –2,300 to 32,800 ft.)
Measuring unit: 1 m (or 5 ft.)
Display Range: –10,000 to 10,000 m (or –32,800 to 32,800 ft.)
Measuring interval: 2 minutes/5 seconds
Reference altitude setting
Altitude differential measurement: –3,000 to +3,000m (or –9,840 to 9,840 ft.)
Sensor Accuracy:
Direction
Measurement accuracy: Within ±10°
Assured accuracy temperature range: –10°C to 60°C (14°F to 140°F)
Temperature
Measurement accuracy: Within ±2°C (±3.6°F)
Assured accuracy temperature range: –10°C to 60°C (14°F to 140°F)
Pressure
Measurement accuracy: Within ±3 hPa (0.1 inHg)
(Altitude measurement accuracy: Within ±75 m (246 ft.))
Assured accuracy temperature range: –10°C to 40°C (14°F to 104°F)
World Time:
Displays current time in UTC +39 cities (39 time zones)*
Auto Daylight Saving Time (summer time) setting
* Time zone data may change when the watch connects with a phone.
Other: Power Saving, LED light, Selectable light duration, Full Auto Light, Charge
level indicator, Button confirmation tone enable/disable, Airplane Mode,
4 alarms (with snooze)
Batteries: One chargeable battery
Battery Operating Time:
Using GPS
Intermittent Receive: Approximately 33 hours maximum
Continual Receive: Approximately 20 hours maximum
Other functions continue operating for about 2 months after the GPS limits
above.
Not Using GPS
Approximately 1.4 years
E-11
E-13
E-15
E-17
E-19
Advertisement
