Advertisement
Quick Links
!
READ FIRST BEFORE OPERATION
The MGC Pump is a personal safety device designed to
detect the presence of Hydrogen Sulfide, Carbon
Monoxide, Oxygen and Combustible gases. Ensure you
have been properly trained on the use of the equipment
and appropriate actions in the event of an alarm condition.
The IR LEL sensor will not detect hydrogen (H
!
(C
H
) gases. However, due to their cross-sensitive nature, the
2
2
CO sensor will go into alarm well below 10% LEL.
Factory Default Alarms
Sensor
Low
H
S
10
2
CO
35
O
19.5
2
LEL
10
Additional Questions?
For additional information on the MGC Pump, refer to the
operator's manual. These documents, as well as other
helpful product information, are available for download at
www.gascliptech.com.
Contact Information
Gas Clip Technologies, Inc.
610 Uptown Blvd, Suite 4100
Cedar Hill, TX 75104
Toll Free: (877) 525-0808
Phone:
(972) 775-7577
E-mail: info@gascliptech.com
Website: www.gascliptech.com
) or acetylene
2
High
TWA
STEL
15
10
15
200
35
50
23.5
20
v1.0
Portable gas detectors you can count on.
Advertisement
Related Manuals for Gas Clip Technologies MGC Pump
Summary of Contents for Gas Clip Technologies MGC Pump
-
Page 1: Contact Information
READ FIRST BEFORE OPERATION The MGC Pump is a personal safety device designed to detect the presence of Hydrogen Sulfide, Carbon Monoxide, Oxygen and Combustible gases. Ensure you have been properly trained on the use of the equipment and appropriate actions in the event of an alarm condition. -
Page 2: Battery Information
When the gas flow is blocked, the detector will go into alarm and disable the pump. Press the button to reactivate the pump. Perform a blocked flow test daily and any time the sampling system is changed to confirm no leaks in the sampling system. Turning Off the Detector Press and hold the button until the OFF countdown Multi Gas Clip...