Larson Electronics RL-85-LED-36W-CPR Operating Instructions

I. Operating Instructions - RL-85-LED-36W-CPR
WARNING: While the charger is intelligent enough to back off the charger when the battery is fully
charged, it is not recommended that you leave the light on the charger indefinitely. Ultimately, the heat
created by the charger and the battery will degrade the components. Leaving the battery to charge
for a day will not cause damage however, leaving the battery to charge for multiple days or weeks
continuously will degrade the life of the charger and the battery.
1. This rechargeable LED can be charged at
any location using a vehicle or wall charger. The
charger connects to the light at the base. The
light can be powered on by pressing the on/off
button located on the front of the handle.
2. The charger will have a solid red indicator
light when the battery is charging.
3. Charge time will vary based on remaining
battery charge and battery condition. Maximum
charge time is 3 hours.
4. The spotlight can be turned on while the
charger is plugged in however, the spotlight will
not charge while the light is being operated.
5. This LED spotlight has a lithium-ion battery.
The battery can be charged as little or as much
as desired without "memory" issues. Lithium ion
batteries do not need to be fully drained before
charging nor fully charged before continuing
usage.
6. The LED indicator will turn green when the
battery is fully charged.
7. Lithium ion batteries generally will discharge
very slowly while not being used. You can expect
a fully charged lithium ion battery to last 9-12
months on the shelf if the light was fully charged
when stored.
On/Off Push
Button
Charging Port
1