Additional Resources - Control 4 C4-SRRS Setup Manual

Set up your remote for the recharging station
You'll need to update your remote to recognize the new
rechargeable battery.
Control4 Dealers: You can select Enable Recharge Station in
Composer Pro (the Properties page) to acknowledge the battery.
This view also shows you the percent battery level.
If you have an SR‑260 or SR‑250 that is online, follow these
steps:
1 On the remote, press LIST, then INFO.
2 Press Config.
3 Select Recharge Station, then select Yes.
If you have an SR‑260 or SR‑250 that is offline, follow these
steps:
1 On the remote, press LIST, then select Config.
2 Select Recharge Station, then select Yes.
If you have an SR‑150:
1 On the remote, press Room Off.
2 Press #, then *.
3 Press 4, then 5, 6, and 0.
control4.com | 888.400.4070
Copyright ©2017, Control4 Corporation. All rights reserved. Control4, the Control4 logo, the 4-ball logo, 4Store, 4Sight, Control4 My Home, and Mockupancy are
registered trademarks or trademarks of Control4 Corporation in the United States and/or other countries. All other names and brands may be claimed as the property of
their respective owners. All specifications subject to change without notice.

Additional resources

For technical support, contact your Control4 Dealer. The
following resources are available to Control4 Dealers for more
support:
• Control4 Knowledgebase and forums
• Control4 Technical Support
• Control4 website: www.control4.com
• Composer documentation in online help or PDF formats,
available on the Dealer Portal under Resources
Regulatory/Safety Information
To review regulatory information for your particular Control4
products, see the information located on the Control4 website at:
ctrl4.co/reg
.
Warranty
Visit www.control4.com/warranty
More help
For the latest version of this document, open this URL or scan the
QR code on a device that can view PDFs.
for details.
C
200-00325-C
2017-03-14 MS