Setup Tab - Philips CCK4602 User Manual

6.5.3

Setup tab


In the "Setup" tab select your matrix: maximum matrix is 15x15

Point structure: how many points must be aligned in each monitor, recommended value = 5
Note: On the bottom of the window of the program on PC you might see some error in red, adapt
where needed according to the errors.

Click on "Identify", it will read the model numbers via RS232

On the videowall you should see on each monitor a number, this pattern is generated from
the PC

Example of a 2x2 :
1
3
2
4
- 9 -