Kodak CFH-V20 Quick Installation Manual

CFH-V20
PA C K A G E C O N T E N T S
CF H-V2 0 WI- F I V IDEO M O NITOR
P OWE R ADAP T ER
MO U NTING KIT
QU IC K IN STAL L AT ION G UIDE
GETTING STARTED
1. ISECURITY+ APP
To get started, download the iSecurity+
app from the Apple App Store or the
Google Play Store.
2. CONNECT TO POWER
Connect the KODAK Video Monitor
CFH-V20 to the AC power adapter, and
plug the power cord into the electrical outlet.
3A. WI-FI SETUP MODE
Once connected, the video monitor
will automatically go into setup mode:
Top LED light will be solid green and the
bottom LED light will blink and alternate
between green and orange (this may take
up to 2 minutes when the video monitor
is first powered on).
3B. CONNECT SMARTPHONE OR TABLET
TO KODAK VIDEO MONITOR CFH-V20
Before connecting to the video monitor,
please turn on the Wi-Fi on your smart-
phone or tablet as well as your personal
Wi-Fi network. Then, go to your smart-
phone or tablet settings under the Wi-Fi
settings, connect to the CFH-V20XXXX
(last 4 digits of the MAC ID, as seen on
the back of the camera) network. Make
sure that you see the Wi-Fi symbol after
connecting to the video monitor.
iOS Android
4A. LAUNCH ISECURITY+ APP
Once your smartphone or tablet
establishes its connection to the
KODAK Video Monitor CFH-V20
(usually takes around 30 seconds),
launch the iSecurity+ app. If you don't
see the pop-up prompt, please close
the app and re-launch it. The iSecurity+
app will automatically detect your
video monitor. When prompted, click
"yes" to setup your video monitor.
iOS Android