Advertisement
4B. SETUP WIZARD
4C. SETUP COMPLETE
Follow the instructions in the video
monitor Setup Wizard to complete
installation.
LIMITED ONE YEAR MANUFACTURE'S WARRANTY
Once you see the page below, the setup
process has been completed. Restart
iSecurity+ and please log in again.
You can use your iOS or Android devices
to access the video monitor anywhere in
the world. Make sure your phone has access
to the internet via 3G, 4G, or WiFi to
establish a connection.
Seedonk, Inc. dba Tend ("Tend") will repair or replace
(at our discretion) your camera unit free of charge
(except for shipping cost) for 12 months from the date
of purchase, if unit is determined to be defective. The
customer should return the defective unit to the original
place of purchase first, based on its return or refund
policy. If the original vendor's return/refund policy has
expired and this unit is still within the limited
manufacturer's warranty, customers can call 1-888-
733-9123 or email us at support@isecurityplus.com to
get an RMA ID and shipping instructions. Camera must
be shipped with proof of purchase. Customer will need
to pay for shipping of the defective camera to Tend.
Tend will be responsible for shipment of replacement
camera. In the absence of a purchase receipt, the
warranty period shall be 12 months from the date the
camera was manufactured.
In no event shall Tend be liable for any special, inciden-
tal, or consequential damages for breach of this or any
other warranty, expressed or implied, whatsoever.
The detailed terms and conditions can be found on
www.connectedfamilyhome.com
U.S. REGULATORY NOTICES
This equipment has been tested and found to comply
with the limits for a digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.
The shielded interface cable recommended in this
manual must be used with this equipment in order to
comply with the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
WE'RE HERE TO HELP
Learn more about KODAK Connected Family Home
products at www.connectedfamilyhome.com
To get the latest software updates or to learn
more about iSecurity+, please visit:
www.isecurityplus.com
The Kodak trademark and trade dress
are used under license from Kodak
Apple, iPad, and iPhone are trademarks of Apple, Inc.
Android is the trademark of Google Inc.
© 2015 Seedonk, Inc. dba Tend. All Rights Reserved.
Made in China
Advertisement
