Linksys WMP11 Quick Installation page 2

D. Windows XP has a built-in configuration tool. After installing the
Adapter, the Windows XP Wireless Zero Configuration icon will appear
in your computer's system tray. Double-click the icon.
D
Note: Steps E and F are the instructions and screenshots for Windows XP
with Service Pack 1 installed. If you have not installed Service Pack 1, select
the network you want, and click the Connect button. If the network has WEP
encryption enabled, enter the WEP key in the Network key field, and then
click the Connect button.
E. The screen that appears will show any available wireless network. Select
the network you want.
If this network has WEP encryption enabled, go to Step F.
If this network does not have
WEP encryption enabled,
then the screen in Figure E
will appear. Make sure the
box next to Allow me to con-
nect to the selected wireless
network, even though it is not
secure is checked. Then click
Connect, and go to Step G.
E
F. If WEP is enabled, the screen in Figure F will appear. Enter the WEP key of
your wireless network in the Network key field, and re-enter it in the
Confirm network key field. Then click Connect.
To find the WEP encryption
key settings of the other wire-
less devices in your network,
such as the WAP11 Wireless
Access Point, you may use any
device's web-based utility to
check the WEP encryption
screen for the correct key
entries. If you are using other
manufacturers' access points,
refer to their documentation
for more information about
WEP encryption.
F
Important: Windows XP
Wireless Zero Configuration does
not support the use of a
passphrase. Enter the exact WEP
key used by your access point.
G. The screen in Figure G will
appear if your connection is
active.
G
For more information about wireless networking on a Windows XP com-
puter, enter the keyword wireless in the Windows XP search engine.
Windows XP users: Congratulations!
The installation of the Wireless-B PCI Adapter is complete.
For additional information or troubleshooting help, refer to the User Guide
on the Setup CD-ROM. You can also call or email for further support.
24-hour Technical Support 800-326-7114 (toll-free from US or Canada)
E-mail Support support@linksys.com
Website http://www.linksys.com or
http://support.linksys.com
RMA (Return Merchandise http://www.linksys.com/support
Authorization)
FTP Site ftp://ftp.linksys.com
Sales Information 800-546-5797 (800-LINKSYS)
W W W . L I N K S Y S . C O M
WMP11_v4-QI_XP-30602A KL