Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Morris MVF-65374
Summary of Contents for Morris MVF-65374
- Page 1 MVF-65374 (EN) INSTRUCTION MANUAL IO-HOB-0612 / 8071178 (12.2017 / v1)
-
Page 2: Basic Information
DEAR CUSTOMER, Your hob combines exceptional ease of use with excellent effectiveness. Once you have read the instructions, operating your hob will not be a problem. Before being packed and leaving the factory, the safety and functions of this hob were ca- refully tested. -
Page 3: Table Of Contents
TABLE OF CONTENTS Basic information ....................2 Safety instructions ....................4 Saving energy .......................8 Description of the appliance ................9 Installation......................10 Operation ......................16 Cleaning and routine maintenance ..............21 Emergency procedure..................23 Technical data .....................24... -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS Warning: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or... - Page 5 SAFETY INSTRUCTIONS Warning: If the surface is cracked, switch off the ap - pliance to avoid the possibillity of electric shock. The appliance is not intended to be operated by me- ans of an external timer or separate remote-control system. You should not use steam cleaning devices to clean the appliance.
- Page 6 SAFETY INSTRUCTIONS ● Before using the ceramic plate for the first time read the Operating Manual carefully as thus you can ensure safe operation and avoid damage to the plate. ● If the ceramic plate is operated near a radio, TV set or other emitting device, please check whether the touch panel works correctly.
- Page 7 SAFETY INSTRUCTIONS ● The heating surface of the ceramic plate is resistant to thermal shock. It is neither hot nor cold-sensitive. ● Avoid dropping objects on the plate. A point hit, for example a falling bottle with spices, may in unfavourable circumstances lead to cracks and splits appearing on your ceramic plate.
-
Page 8: Saving Energy
SAVING ENERGY UNPACKING Everybody who properly The appliance is protected from damage during transpor- uses energy not only saves tation by its packaging. After money but also consciously acts in aid of the natural unpacking please dispose of the packing materials in a environment. -
Page 9: Description Of The Appliance
DESCRIPTION OF THE APPLIANCE Description of MVF-65374 hob Rear left cooking zone Ø 145 mm Rear right cooking zone Ø 180 mm Front left cooking zone Ø 210 mm Front right cooking zone Ø 145 mm Control Panel 1. On/Off/Select a cooking zone 2. -
Page 10: Installation
INSTALLATION Making the worktop recess • Worktop thickness should be 28 - 40 mm, while its width at least 600 mm. The worktop must be flat and level. Edge of the worktop near the wall must be sealed to prevent ingress of water or other liquids. - Page 11 INSTALLATION Note. When installing the hob in the kit- chen worktop, install a partition panel, as shown on the picture. If the hob is to be installed above a built-in oven, installa- tion of the partition panel is not required. If the hob was installed in the kitchen Installing hob in kitchen cabinet worktop.
- Page 12 INSTALLATION Installation of self-adhesive foam gasket Do not install the appliance without the foam gasket. The gasket must be applied on the appliance as follows: Before fitting the appliance in the kitchen worktop, apply self-adhesive foam gasket provided underneath the rim. - before applying, remove the protective film from the self-adhesive foam gasket - apply the self-adhesive foam gasket underneath the appliance rim (Figure)
- Page 13 INSTALLATION Installing MVF-65362 hob bracket • Use four “A” brackets for 38 mm thick worktops. Fit the hob into worktop opening as shown on figure2 and 3. To properly secure hob in 28 mm thick worktop, use four 15x15x50 mm wooden blocks in addition to “A”...
- Page 14 INSTALLATION Connecting the plate to the electrical system Note! The plate can be connected to the mains only by a qualified certified installer. Wilful adaptations or modifications to the electric system are prohibited. Guidelines for the installer The plate is factory-set for three-phase alternating current power supply (400 V 3N~50 Hz). It may be adapted for one-phase current power supply (230 V) by adequate bridging on the connection strip, in accordance with the attached wiring diagram.
- Page 15 NSTALLATION DIAGRAM OF POSSIBLE CONNECTIONS Notice! Voltage of heating elements is 230V Recommended type of con- nection cable Warning! In every type of connec- tion protective grounding has to be connected to terminal 1 In the case of the 230V network, sin - H05VV-F3G4 gle phase connection with a neutral 3X 4 mm...
-
Page 16: Operation
OPERATION The ceramic plate is equipped with sensors operated by touching the marked areas with a finger. Every touch of a sensor is confirmed with a sound. When switching the plate on and off and setting the heating power always touch only one sensor. - Page 17 OPERATION Control Panel When you connect the appliance to power, Child Lock indicator (5) will be on. Touch and hold the Child Lock sensor (5) until the indicator is off. Now you can use the appliance. No objects should be placed on the sensors (this could cause an error). Touch sensors should be always kept clean.
- Page 18 OPERATION Set the heating power In order to set the heat setting, first select the desired cooking zone using the cooking zone selection sensor (1). Then, when the cooking zone display (2) shows “ ” start setting the desired heat setting using the (+)(4) or (-)(3) sensor field. Switch off...
- Page 19 OPERATION Automatic warm-up function Each cooking zone is equipped with an auto- matic warm-up function. When this is activat- Cooking heat Fast cooking time ed, then the given cooking zone is switched setting (min) on at full power for a time depending on the 1,18 heat setting selected, and is then switched 2,73...
- Page 20 OPERATION Residual heat indicator Heat energy that remains accumulated in the cooking zone after cooking is called the resid- ual heat. The appliance displays two different levels of residual heat. When a cooking zone temperature is above 65°C and the cooking zone or the appliance is switched off, the relevant cooking zone display will show the letter "H".
-
Page 21: Cleaning And Routine Maintenance
CLEANING AND ROUTINE MAINTENANCE Daily cleaning and proper maintenance have crucial impact on the durability of your ceramic plate. Clean the ceramic plate observing the same rules as for glass. Never use abrasive or aggressive clean- ing agents, scrubbing powders or scratching sponges. - Page 22 CLEANING AND ROUTINE MAINTENANCE Never apply cleaning agent on a hot hotplate. Caution! Leave the cleaning agent to dry and then If from any reason you are not wipe it off with a wet cloth. Any residuals of able to control the switched on cleaning agents should be wiped off...
-
Page 23: Emergency Procedure
EMERGENCY PROCEDURE Every time when emergency situation occurs you should: ● switch off the working assemblies of the plate ● disconnect power supply ● call in the service ● as some minor faults can be removed by the user in accordance with the be low specified instructions, before calling the Customer Service please go thro ugh the Table checking every point. -
Page 24: Technical Data
Manual. TECHNICAL DATA Rated voltage: 230/400V 3N ~50Hz Model: MVF-65374 - hotplate: 1 x Ø 145 mm 1200 kW - hotplate: 1 x Ø 180 mm 1800 kW - hotplate: 1 x Ø 210 mm... - Page 25 OTICE ABOUT RECYCLING Your product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste. Please dispose of this equipment at your local community waste collection/ recycling centre.
Need help?
Do you have a question about the MVF-65374 and is the answer not in the manual?
Questions and answers