•
The following setup instructions will appear on the screen. (Pictures A3)
•
Plug in and switch on the camera, and wait for a couple of minutes for it to
warm up.
•
Tap Continue when the Camera LED starts to blink.
•
The following setup instructions will appear on the screen. (Picture A4, A4a)
•
Press and hold the PAIR button on the back of the Camera Unit for 3
seconds. You will then hear a beep tone, followed by a voice prompt
indicating that the Camera is ready for pairing.
•
Tap DETECT CAMERA.
Getting started - Connecting Devices
A3
A4
A4a
11