Table of Contents
Advertisement
2.3 Connect a browser to
Note:
For more information about changing various parameters, see
using the VCA Manager"
If your network has a DHCP server running, the
automatically connected to it.
3 To change the network settings of an interface to a static IP address, use the network
parameter section of the Setup page:
3.1 Add a static IP address
3.2 Add a gateway
3.3 Add a network mask
If you are not sure what to enter, ask your system administrator.
Note:
From this Setup page, you can switch an interface to a static IP address or to
DHCP as often as you want.
If you do not want to change the network settings of an interface to a static IP
address, leave this section empty and click
4 To test the performance of the Quadro VCA, perform a render test by clicking
5 After you have completed and submitted all sections, a
the upper left corner of the form. Click
6 Set the IP address of the external machine back to what it was before (DHCP).
7 Reconnect to
https://
8 Accept the certificate warning.
9 Login to the VCA Manager again:
User Name: admin
Password: admin
Note: When you change the interface to a static IP address, the IP address of the
InfiniBand interface is changed automatically.
©
NVIDIA Corporation NVIDIA Quadro Visual Computing Appliance — Installation Guide
http://192.168.124.10:14000
(page 14).
Restart
VCA-IP-address.
.
"System setup
interface is
eth3
.
Submit
button is displayed in
Restart
to restart the VCA Manager.
Quickstart
.
Start Test
Advertisement
Table of Contents
