Danfoss VLT FC 102 Installation Instructions Manual page 12

1 DC-link bus bars (under mesh screen)
2 Solid mains bus bars
3 Ground bar support bracket
4 Ground bus bar
5 Ground plate
6 Drive module 2
Illustration 1.13 Installing Lower EMI/EMC Shield on an Assembled 2-Drive System canceled
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on
order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss
and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss A/S
Ulsnaes 1
DK-6300 Graasten
vlt-drives.danfoss.com
130R0689
7 Flexible motor bus bars for drive module 2
8 Front EMI/EMC bracket assembly for drive module 2
9 Flexible mains bus bars for drive module 2
10 Solid motor bus bars for drive module 2
11 Lower EMI/EMC shield
– –
MI92I102
*MI92I102*
02/2016