Clare Controls CLIQ.mini Quick Start Manual

Additional Information and Support

Installation and Setup Manual:
www.clarecontrols.com/mini-techguide

Warranty Information

Clare Controls offers a three (3) year limited warranty on
original Clare Controls components, from the date of
shipment from Clare Controls. To view complete limited
warranty details, including limitations and exclusions,
www.clarecontrols.com/warranty.
Scan the code to view
product warranty details.

Support

For technical issues and additional support, please
contact Clare Technical Services at:
claresupport@clarecontrols.com
www.clarecontrols.com
Doc ID: 2018-03-1284-06

Product Information

(1) Recessed push button (4) Wall mount slot
(2) 2 USB ports (5) Micro USB port
(3) Wire routing channel (6) Ethernet port

Additional Information

LED Indicators

LED Display Troubleshooting
Solid blue
Everything is working correctly.
The CLIQ.mini is not connected to
Blinking red in 2
your home network. Shut down and
second intervals
power cycle the CLIQ.mini.
ClareOS is not operational. Shut down
Solid red
and power cycle the CLIQ.mini.
There is no power connected to the
Not lit
CLIQ.mini. Check that the power supplies
are plugged in and wired correctly.
Blinking red Firmware update in progress can
and blue take up to 5 minutes.
When the CLIQ.mini reboots, it can take up to 25 seconds
to successfully restart in AP mode.
To shut down the CLIQ.mini, use the provided paper clip
to press and hold the recessed push button down for 5
seconds.
To shut down and power
cycle the CLIQ.mini in AP
mode, use the provided
paper clip to press and
hold the recessed push
button down for 20
seconds.
CLIQ.mini
Smart Home Control Hub
Quick-Start Guide