Advertisement
• When finished, rinse your face and check for any hairs that may have been
Cleaning and Care
missed for quick touch up.
• When using your shaver with foams or gels it is important to rinse the cutting
Note: When cleaning your shaver, make sure the shaver is turned off and
head clean after each use. This will avoid having the gels dry in the cutting
disconnected from the charging base.
head and clogging the shaver. Refer to the cleaning instructions to keep your
• Your HyperFlex shaver is built to be watertight. This makes clean up fast and
shaver cutting at peak performance.
easy as it is safe to rinse the shaver body and head under running water.
Dry Shaving
• Do not use strong detergents or chemicals to clean your shaver. Water alone
• Dry shaving is a fast and low mess way to shave.
or with mild anti-bacterial soap is recommended.
• Press the power button to turn the shaver on.
• Do not place your shaver in the dishwasher.
• Place the shaver cutting head against your skin with all three cutters touching
your skin.
• Pressing lightly against your skin, move the shaver head in slow, small
circular motions.
C
D
• Hairs on your face and neck may grow in different directions. Moving your
shaver against the direction of hair growth will be most effective.
• You may use your free hand to gently stretch your skin tight which can aid in
making hairs stand up to more easily enter the cutting slots.
• To trim sideburns or edges of goatees or beards, press the pop-up trimmer
F
G
release button to activate the trimmer. Place the trimmer blade parallel with
your skin and use downward strokes to cut.
• Refer to the cleaning instructions to keep your shaver cutting at peak performance.
J
K
Daily Cleaning
1. Pull the rotary cutter face off of the cutting head, (C) and (D). This will expose
the hair pocket where shaven hair particles are collected.
2. Tap out excess shavings in the sink or waste basket (E).
3. Rinse both the cutter face and hair pocket under warm running water to rinse clean.
4. Snap the cutter face back onto the shaver.
Weekly Cleaning
1. A more thorough cleaning of the cutters on a weekly basis will add to the life
and performance of your shaver.
2. Pull the rotary cutter face off of the cutting head, (C) and (D). This will expose
the hair pocket where shaven hair particles are collected.
3. Tap out excess shavings in the sink or wastebasket (E).
4. Release the blue inner cutter support by sliding it out of the snap lock. Note the
small triangle at the center of the blue support. With your fingertip, slide the blue
support back to release the snap. (F) (G)
5. Remove the inner cutters from the individual cutting heads. (H) Note that the hubs
of the cutters are color coded to match the color of the outer cutters. The cutters
should be mated with their matching color for best performance and life.
6. Thoroughly rinse away any small debris from both the inner and outer cutters
and hair pocket.(I)
7. Replace the inner cutters. Remember to match the color coded hubs. (J)
8. Replace the blue inner cutter support. Be sure it securely snaps back in under
the small triangle at the center of the cutting head. (K)
9. The cutter assemblies may be lubricated with a single drop of household oil.
10. Snap the cutter face back onto the cutting head base.
E
Product Disposal
When your rechargeable shaver reaches the end of its useful life, the LiFePO 4
batteries must be removed from the shaver and be recycled or disposed of prop-
erly in accordance with your state and local requirements. If this is not required
H
I
by law, you may elect to dispose of the shaver with the batteries.
CAUTION! Do not put in fire or mutilate your batteries when disposing as they
may burst and release toxic materials. Do not short circuit as it may cause burns.
Dispose of properly in accordance with your local and state requirements.
To Remove the Rechargeable Battery:
1. Unplug the shaver
2. Run shaver until the motor stops
3. Remove the head from the shaver (Pull head up and off)
4. Using a small screwdriver, pry the 'collar' off of the top of the handle
5. Using a small screwdriver, pry the front cover from the body
6. Remove three screws located on front of shaver
7. Using a small screw driver, pry up the newly unsecured inner housing to
expose the battery
8. Pry battery free from circuit board
9. Dispose of battery properly
Warranty
Product Registration
Limited Two-Year Warranty
By registering your new Remington
®
product you will receive these important
Spectrum Brands, Inc. warrants this product against any defects that are due to faulty
benefits:
material or workmanship for a two-year period from the original date of consumer
• Proof of ownership
purchase. This warranty does not include damage to the product resulting from
• Product protection
accident or misuse. If the product should become defective within the warranty
• Product registration
period, we will replace it free of charge. Return your product and sales receipt with
• Special offers
your name, address and day time phone number to: Remington Returns Center,
507 Stokely Dr., P.O. Box 1, Deforest, WI 53532 . For more information call
Register online at: RemingtonProducts.com
800-736-4648 in the US or 800-268-0425 in Canada.
Warranty excludes:
Shaver Replacement Parts
■ Heads and cutters
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY
To keep your HyperFlex shaver working at peak performance, it is recommended
PURPOSES.
that you replace the cutting head after every 12-18 months of use. Indication
that your shaver may need to have the cutting head replaced would be if you
notice an increase in irritation of your skin after you shave or you feel hair pulling
This warranty does not cover products damaged by the following:
■ Accident, misuse, abuse or alteration of the product
due to dull cutting blades.
■ Servicing by unauthorized persons
The replacement cutting head for your shaver is model number SPR-XR14
■ Use with unauthorized accessories
■ Connecting it to incorrect current and voltage
Shaver Accessories
■ Wrapping cord around appliance causing premature wear & breakage
Remington also offers these additional attachments that fit
■ Any other conditions beyond our control
your HyperFlex shaver. These attachments easily snap on
and off interchangeably with your shaving head.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
Groomer attachment with adjustable length settings: SPR-XT
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IM PLIED
• If you like to wear a beard, goatee, or stubble look, the groomer head will trim
WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO
your facial hair to adjustable lengths between .5 mm and 5 mm.
TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
Facial Brush attachment: SPR-XFB
• The facial brush attachment is used for deep cleaning and exfoliating for
This warranty gives you specific legal rights and you may also have other rights
healthy facial skin. Two brush types are available.
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
SPR-XFM Massage Brush
SPR-XFN Cleansing Brush
How to Order Parts and Accessories
Two easy ways to order spare parts and accessories are available.
• Order by Phone:
U.S. Residents: 1-800-392-6544
Canadian Residents: 1-800-268-0425
• Order Online:
RemingtonProducts.com
Performance Guarantee
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product,
you are not satisfied and would like a refund, return it with the sales slip indicating
purchase price and date of purchase to the retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse all retailers who accept the product within 30
days from the date of purchase. If you have any questions concerning the money-
back guarantee, please call 800-736-4648 in the US or 800-268-0425 in Canada.
Remington Guarantees Satisfaction After 30 Days!
Remington Men's Shave and Groom 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
branded Men's Shave and
Groom product, you are not completely satisfied and would like a refund, return
it with the original dated sales receipt directly to Remington and receive a full
refund.** For questions concerning the money-back guarantee, please call
800-736-4648 in the US or 800-268-0425 in Canada.
*Applies to US and Canadian customers' returns only.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in US Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington
branded Men's Shave and
®
Groom product:
a. The Remington
®
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned
product was used in accordance with the instruction booklet (included with the
product at the time of purchase).
Questions or comments: Call 800-736-4648 in the US or 800-268-0425 in
4. Returns should be mailed prepaid (no collect returns accepted) to:
Canada. Or visit RemingtonProducts.com
Remington 60-Day MBG
507 Stokely Drive, Box 1
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
DeForest, WI 53532
Dist. by: Spectrum Brands Canada, Inc.,
5. Refund does not include postage costs for the return of the product, but will
131 Saramia Crescent, Vaughan, ON L4K 4P7
include applicable taxes paid by customer, if any.
® Registered Trademark and TM Trademark of Spectrum Brands, Inc.
6. No responsibility will be accepted for late, lost, stolen, misdirected or
damaged product.
© 2015 Spectrum Brands, Inc. 8/15 13521-00
7. Please allow 4-6 weeks to receive your refund by check.
Made in China
T22-0003730
Contains a Listed Adaptor
Advertisement
