Placing Environment - Haier H2F-220WSAA Instructions For Use Manual

BEFORE USE

Placing Environment

The freezer should be placed on a flat and solid surface. If the
appliance is placed on a pedestal, flat strong and fire-resistant
materials must be used. Never use the foam packing material
as a pedestal. If the freezer is slightly unstable, you can prolong
or shorten the adjustable foots of the freezer by turningthem
clockwise or counterclockwise to increase or decrease the height
of the freezer. Do not place the freezer under the direct sunlight or
in a place where it is exposedto heaters to ensure the performance
of the Freezer. Install the appliance in a well ventilated place and a space of at least 10cm must be
kept above and around the freezer.
Never place the freezer in a damp area or location where it may be splashed with water. Clean and
dry any water splashes and stains with soft cloth in time to prevent rust.
Do not place the freezer where the temperature is too low (under 5 ). Do not keep freezer outside
°C
or under the rain.
Preparation prior to use
Remove all package parts, the foam base and the adhesive tape fixing accessories.
Place the freezer in a proper location (please refer to Placing Environment).
Clean the inside and outside of the freezer before use (please refer to Defrosting and Cleaning)
After the appliance has been leveled and cleaned, let it remain idle for at least 6h before switching
it on so as to ensure its normal running.
7