Danfoss VLT HVAC Drive FC 102 Installation Instructions Manual page 5

Installation Instructions
3. Remove all control cables from the metal bracket
(spring-loaded).
4. Remove any A, B, or C options that may be installed.
5. Remove the I/O terminals.
1 Location of A option
2 Location B option
3 I/O terminals
Illustration 1.5 Location of Options and I/O Terminals
MI93A102
®
Control Card VLT FC Series
6.
7.
1
2
3
Illustration 1.6 Location of Cable Shield, Screws, and MCO Ribbon
Cable
Danfoss A/S © 03/2017 All rights reserved.
Unscrew the 3 T10 screws and remove the cable
shield.
Remove the plastic cover underneath the cable
shield.
Cable shield
MCO ribbon cable
T10 screws
5