Remington 493 Operating Instructions Manual page 25

IMPORTANT
• Recommended for use with Remington power load strips and power fasteners.
• Only use power fasteners up to 3" long.
• If power fastener goes below the top surface of the board, use penetrating control
disc (* see illustration below).
• Always wear approved eye and ear protection.
* Use power fastener with penetration control disc, part number 015549.
27 CALIBER
strip loads for
powder
actuated tools
103500
Application Chart
482-90
Load
Level Load
Number Strength
3 medium
4 heavy
5 extra heavy
25
Color Code
Case
Body Head
brass Green
brass Yellow
brass Red