Changing A Particular Option - Samsung AE022MNJDEH Installation Manual

Changing a particular option

You can change each digit of set option.
Option SEG1
Explanation PAGE
Indication DetailsI
Indication
and Details
0
NOTE
• When changing a digit of an indoor unit address setting option, set the SEG3 as 'A'.
• When changing a digit of indoor unit installation option, set the SEG3 as '2'.
Ex) When setting the 'buzzer control' into disuse status.
Option SEG1
Explanation PAGE
Indication 0
CAUTION
• If you are using heat pump model, mixed operation mode (two or more indoor units operating in different
operation mode simultaneously) is not available when the indoor units are connected to same outdoor unit. If you
set the master indoor unit with a remote control, outdoor unit will operate in the mode which was set in the master
indoor unit.
SEG2 SEG3
The option mode
MODE
you want to change
Indication Details Indication Details
Option
D
mode
SEG2 SEG3
The option mode The tens' digit of an
MODE you want to option SEG you will
change
D 2
SEG4
The tens' digit of an The unit digit of an
option SEG you will option SEG you will
change
Indication Details Indication
Tens' digit
Unit digit
1~6 0~9
of SEG of SEG
SEG4 SEG5
The unit digit of
an option SEG you
change will change
1 7
SEG5 SEG6
Changed value
change
Details Indication Details
The
0~9 changed 0~F
value
SEG6
Changed value
1
English
31