Table of Contents
Advertisement
Using the MIDI Functions:
1. Connecting the keyboard to other MIDI instruments:
To transmit MIDI data from your keyboard to other professional MIDI
instruments, please purchase a MIDI cable and use it to connect the MIDI
OUT jack of your KEYSTATION to the MIDI IN jack of the other instrument.
Make sure that the MIDI port "transmit" channel within you music
application matches the MIDI "receive" channel of the other instrument.
2. Please refer to the diagram in the section, "Setting Up Your MIDI Studio" for
the MIDI and audio connections.
Default Settings of The KEYSTATION
The KEYSTATION will always select the following values for their parameters
when the power is turned on.
• Transmit MIDI Channel no. 1.
• Default Octave will be from C2(36) to C6(84)
• Default After Touch value will be 0
• Default Velocity value will be 0
• Default Reverb Depth value will be 64
• Default Pan Pot value will be 64
• Default Volume value will be 127
• Default CC Data value will be 0
• Default CC no. value will be 0
• Default Control Change (CC-00=0, CC-32=0) message will be
transmitted.
• Default Program Change (PG=1) message will be transmitted.
Overall Diagram Preview:
1
Part A. Operation panel:
3 4
2
10
Advertisement
Table of Contents
